3RD Gen Ram 1500 Fitment Guide
June 1, 2022
So you own or you just got a 3rd Gen Ram. Now it's time for the fun, you get to customize your pickup truck and make it everything you ever wanted. But what the heck is going to fit your truck?
This guide will give you the information you need to get the look you want regardless of what suspension setup you have! Read on and check out the corresponding links to learn more.
Bolt Pattern: 5x5.5 or 5x139.7
Popular Suspension Setups: Stock Suspension Up to 6 Inches of Lift
Common wheel Sizes: 17 to 24 inches
3rd Gen Ram Stock Suspension Fitment
The most common setup for this generation Ram on stock suspension is a set of 20x10 -24 wheels with 33x12.5R20 tires. The lower offset wheels will help to give your truck a more aggressive look over your stock wheels and tires.
Recommended wheel and tire sizes for a 3rd Gen Ram on Stock Suspension.
3rd Gen Ram Leveling Kit Fitment
Leveling kits are one of the most common suspension upgrades for your Ram. They allow you to fit slightly larger tires while being easy to install. One of the most common wheel and tire packages for this setup is a set of 20x10 -24 wheels with 33x12.5R20 tires.
Recommended wheel and tire sizes for a 3rd Gen Ram with a leveling kit.
3rd Gen Ram 3” Lift Fitment
Upgrading your suspension even further to a 3” lift kit will give you more ground clearance and will allow you to fit even wider wheels. The most popular setup for this generation Ram is a set of 20x10 -24 wheels and 33x12.5R20 tires.
Recommended wheel and tire sizes for a 3rd Gen Ram with a 3-inch lift kit.
*This setup will require plastic trimming.
3rd Gen Ram 4-6” Lift Fitment
Moving up to a 4-6” lift kit opens up a lot of possibilities, especially compared to a Ram on stock suspension. Tires over 33" will now clear without major modifications, and wheels with more aggressive offsets will fit. Take a look at this Ram on a set of 20x10 -24 wheels and 35x12.5R20 tires.
Recommended wheel and tire sizes for a 3rd Gen Ram with a 4-6 inch lift kit.
*A 6- inch lift and plastic trimming are required for this setup.